Skip to content
Submittal

SubmittalLink alternative that builds the submittal log from your spec

SubmittalLink is a construction management tool for smaller builders, listed on Capterra and G2 from about 150 USD a month. Submittal is narrower. It reads your project manual, builds the submittal register with every row traced to the paragraph that requires it, and runs each package through review to closeout. Starter is 49 USD a month for one active project (24 USD billed yearly). If your problem is a log nobody trusts and not a missing all in one suite, this is the alternative to test on one spec section.

Project engineer reviewing a submittal register on a tablet next to a printed spec section
1.0

What is a good alternative to SubmittalLink?

A good alternative depends on what you are replacing. If you want a suite for submittals, RFIs, daily reports, punch lists and contracts, look at other all in one tools. If you want submittals done properly, choose software that generates the log from the specification, shows the source paragraph on each row and routes packages through the GC, architect and consultants. Submittal does the second job and charges per active project.

Prices below come from public listings (Capterra, G2) as of October 2026. SubmittalLink does not publish a full price page that we could verify, so confirm everything with the vendor.

SubmittalLinkSubmittal
What it isConstruction management for smaller builders (submittals, RFIs, daily reports, punch lists, change orders, contracts)Focused submittal software
Listed priceFrom about 150 USD a month flat. One blog lists Pro at 250, which we could not confirmPer active project. Starter 49 a month, 24 billed yearly
Users and projectsListings describe unlimited users and projectsUnlimited reviewers and subs at no cost. Projects capped by plan
Log from the spec bookNot shown in the listings we foundYes, every row linked to its paragraph, scanned PDFs included
Review routeSubmittal and RFI trackingGC, architect and consultants in order, five standard stamps, ball in court
Best forA small builder that wants one cheap tool for the whole jobA team that needs a complete, traceable submittal log on the next job

Where SubmittalLink wins: one flat price covering RFIs, daily reports and punch lists is hard to beat if you run many small jobs and want everything in one place. Where Submittal wins: the register starts from your spec, so the first week of the job goes to review and not typing.

2.0

Teams that look for a SubmittalLink alternative

  • A project engineer who keeps the log in Excel because the tool does not read the spec book, and who wants every row tied to its section and paragraph
  • A mechanical, electrical or roofing sub who needs its own register across several GCs, see submittal software for mechanical contractors or for electrical contractors
  • A GC with one large job that needs closeout documents collected from day one, not a suite for every project
  • An architect or CM agency that wants reviewers to join at no cost and wants a clean stamp history

If you run ten small jobs and want RFIs and punch lists in the same flat plan, stay with an all in one tool. The point of this page is the teams who do not.

3.0

How the submittal log gets built

Upload the project manual, scanned or text PDF. Submittal finds the MasterFormat sections, reads Part 1 and creates one row per required item.

  • Each row carries its source, such as 08 71 00, 1.4.B, so a reviewer opens the exact paragraph
  • Action, informational and closeout submittals are split, so the closeout list exists on day one
  • Lead times back-calculate the date each package must go out on Team plans and above
  • You can test one spec section from the homepage before paying

The full walkthrough is on the construction specification software page and the column view is on the submittal log page.

4.0

What it costs when you add jobs

SubmittalLink lists a flat monthly fee. Submittal grows with active projects. Here is the yearly math with Submittal billed yearly, and SubmittalLink at the 150 USD a month listing (1,800 USD a year).

ScenarioSubmittalLink at 150 USD a monthSubmittal
1 active project1,800 USD a yearStarter, 288 USD a year
5 active projects1,800 USD a yearTeam, 888 USD a year
25 active projects1,800 USD a yearBusiness, 2,988 USD a year

Fairly read: at one to five projects Submittal costs less. At twenty five projects the flat fee is cheaper, though it buys a different tool. Our plans and limits are on the submittal management software page, and the wider market is in our submittal software pricing comparison.

5.0

Capability table

CapabilitySubmittal
Reads the project manual (PDF, also scanned) and finds MasterFormat sectionsYes, on every plan
One register row per required item, linked to its spec paragraphYes, on every plan
Review route through GC, architect and consultants with five stampsYes, on every plan
Ball in court, email reminders, overdue listYes, on every plan
Subcontractor portal linksTeam and higher
Closeout binder as one PDF with a table of contentsBusiness and Enterprise
Export to Excel, CSV and PDF, PDF transmittalsYes, on every plan

The full list is on the submittal software page.

6.0

Moving a running log

Export your current log to Excel, import it, map the columns once and keep your numbering. Upload the spec book next. Rows built from the sections sit beside the imported ones, so you can see what the old log missed. Open packages continue as the next revision. We have the same comparison for Procore, Fieldwire and Autodesk Build.

7.0

About the names on this page

SubmittalLink is a trademark of its owner. Submittal is not affiliated with, endorsed by or sponsored by SubmittalLink. Descriptions reflect public listings at the time of writing. Check the current offering with the vendor.

8.0

Frequently asked questions

How much does SubmittalLink cost?

Capterra and G2 list SubmittalLink from about 150 USD a month, flat rate. One blog lists a Pro plan at 250 USD a month, which we could not confirm on the vendor site. Ask the vendor for a current quote.

Does SubmittalLink read the spec book?

We found no mention of automatic log creation from specifications in its public listings. Ask the vendor for a demo with your own project manual.

Can I use Submittal for one job and keep my other tool?

Yes. Run the register for one project in Submittal. Starter is 24 USD a month billed yearly and exports to Excel and PDF.

Do subcontractors and architects need to pay?

No. External reviewers and subcontractors are unlimited and join at no cost on every plan.

Build your first submittal log