Skip to content
Submittal

Submittal software for roofing contractors, with membrane, metal and warranty submittals built from your spec

Submittal software for roofing contractors should read the Division 07 roofing sections, list every submittal they require with its paragraph reference, and track each package through the GC and the architect until the stamp comes back. Submittal does that. Upload the project manual, get one register row per required item (product data, shop drawings, samples, test reports, installer certificates, warranty forms), and keep the roof from waiting on a missing approval. Plans start at 24 USD a month per active project billed yearly, and the GC and design team you invite are unlimited.

Roofing project manager and project engineer reviewing a submittal register in a site trailer
1.0

What a roofing submittal register has to cover

Roofing is one of the trades where a late approval stops the whole building envelope. The membrane or panels are ordered on a lead time, the crew is scheduled around weather, and the manufacturer warranty depends on paperwork being right before the first sheet goes down. A generic log tells you a package exists. A spec built register tells you which of the 15 or 20 items in the section you have not yet sent.

Roofing section (MasterFormat)Typical submittals the spec asks forWhy they hold up the job
07 54 23 TPO roofingMembrane and insulation product data, fastener pattern and wind uplift calculations, tapered insulation layout, sample of membrane color, manufacturer warranty formInsulation and membrane are ordered from the layout, and uplift ratings must match the specified approval
07 41 13 metal roof panelsPanel shop drawings, clip and fastener details, color chips, finish warranty, test reportsPanels are fabricated to the approved drawings and color, so a revise and resubmit costs weeks
07 31 13 asphalt shinglesShingle and underlayment data, color samples, manufacturer system warrantyColor selection is an owner decision that often arrives late
07 62 00 sheet metal flashing and trimEdge metal and coping shop drawings, gutter and downspout details, finish and edge test dataEdge metal is often required to be tested and shop fabricated before the roof is closed in
07 72 00 roof accessoriesCurbs, hatches, vents and pitch pocket detailsCoordinate with mechanical curbs that other trades submit separately
07 92 00 joint sealantsSealant data, compatibility and adhesion test reportsOften missed because it is a separate section
Section 01 33 00 and 01 78 00Administrative submittals, installer qualifications, closeout warranties and O&M dataThese come due at substantial completion and gate final payment

Try it on your own roofing section before you buy. The homepage tool builds the rows for a spec section you upload, so you can see whether it finds the items your project manager would find.

2.0

The submittal problems that delay a roof

Most roofing delays blamed on weather were started in the submittal log weeks earlier.

  • Tapered insulation layouts and shop drawings that depend on the mechanical curb locations, so one trade waits on another
  • Wind uplift and fire ratings that must match a specific approval listing, with the data sheet showing a different system
  • Manufacturer warranty applications that need the architect's roof details, an approved installer and a pre roofing conference record before they are accepted
  • Color and finish decisions on metal panels and trim that stay open until the owner signs off
  • Alternate or substituted products that come back Revise and resubmit because the equal product was not documented against the specified one
  • Closeout items such as the manufacturer warranty, maintenance instructions and as built details, which pile up at substantial completion

A register built from the spec makes each of these a row with a due date and an owner on day one. Our guide to construction submittal examples shows a sample TPO roofing package under 07 54 23, with numbering and the stamp it usually returns with. When a package comes back marked up, what revise and resubmit means explains how to turn the comments into a clean second round.

3.0

From the roofing spec to a tracked register

  1. 1Upload the project manual. Submittal finds the MasterFormat sections, scanned PDFs included, and you select Division 07 plus the administrative sections that touch the roof.
  2. 2Review the register. Each required item is one row with its paragraph. Action, informational and closeout items are separated, so you see test reports and warranty forms next to the product data.
  3. 3Set dates from the schedule. Give each row a due date back calculated from the roof start and the material lead time.
  4. 4Send and track packages. Each package goes to the GC and the design team in order, with one of five standard stamps. You see whose turn it is and when it is overdue.
  5. 5Close out. The warranty, maintenance and as built items stay on the list from day one, so nothing is left for the last week.

The longer walkthrough is on the construction specification software page.

4.0

Roofing contractors and their project teams

  • Project managers and estimators at commercial roofing and sheet metal subcontractors running several jobs for different GCs
  • Project engineers and coordinators who keep the submittal log and chase stamps, usually in Excel today
  • Owners of small and mid size roofing firms who want one register per job without paying for a seat for every office user
  • Design build and re roofing contractors who work to a combined scope and need the warranty paperwork tracked

Roofing is a subcontract trade on most commercial jobs, so you usually submit into the GC's system and also need your own list. Submittal gives you that list per project, and the GC you invite joins at no cost. Roofing sits next to other envelope and building system trades, so if your firm also covers sheet metal or HVAC curbs, see the submittal software for mechanical contractors page, for glazing and openings see submittal software for glazing contractors, and for the broader sub view the submittal software for subcontractors page. If you are weighing platforms, the best submittal software for subcontractors comparison shows what each costs.

5.0

What roofing submittal software costs per project

Per user tools charge for every estimator, PM and coordinator who opens a package. Submittal charges for active projects, and the GC, architect and engineers you invite are unlimited.

Your workloadSubmittal planYearly cost billed yearly
1 active projectStarter288 USD
Up to 5 active projectsTeam888 USD
Up to 25 active projectsBusiness2,988 USD

Monthly billing is 49, 149 and 499 USD. Compare that with the hours spent building a roofing register by hand for each bid and award. For vendor by vendor numbers see the submittal software pricing comparison, and for our own limits see the submittal management software page.

6.0

Check the data sheet against the right reference

Roofing specs cite outside standards, and the submittal has to show the product meets them. Look at the wind uplift rating in the FM Approvals RoofNav listing the spec names, and use the roof system guidance in the NRCA Roofing Manual and its technical resources at nrca.net for detail and flashing practice. Submittal does not replace that review. It makes sure the item is on the list, has an owner and a date, and is not forgotten until the manufacturer asks for it. The FM listing database is at RoofNav.

7.0

Frequently asked questions

What is the best submittal software for roofing contractors?

The best fit reads the Division 07 sections, lists every required submittal with its paragraph, and tracks each package through the GC and architect. Submittal does this and is priced per active project, from 24 USD a month billed yearly for one project, with the GC and reviewers free.

What submittals does a roofing contractor usually have to provide?

Typically product data for the membrane or panels and insulation, shop drawings for flashing, edge metal and tapered layouts, color samples, test reports, installer qualifications and the manufacturer warranty. Your spec lists them paragraph by paragraph, and the register keeps them together.

Can I build the roofing submittal log from the specifications?

Yes. Upload the project manual and Submittal creates one register row per item each section requires, linked to its paragraph. You review the rows, set due dates from the roof schedule and group them into numbered packages.

Do roofing subcontractors pay for the GC's submittal software?

It depends on the GC's platform. Many charge nothing to submit into it, but you still need your own list across jobs and GCs. A per project tool keeps that register in one place without paying a seat for every office user.

How much does submittal software cost for a roofing company?

Submittal charges per active project, not per user. One project is 288 USD a year billed yearly, five projects 888 USD, and 25 projects 2,988 USD. The GC and reviewers you invite are unlimited.

Build your first submittal log